Lowel-light LOWEL CASELITE 2 Manuel d'utilisateur télécharger pdf (Page 2)

Laying the Caselite down, with its rear

mounting adaptor facing up, release

the twist-locks and lift the fixture half

straight up off the lid half. Lay the

fixture down with its exterior facing up.

Release the interior flap locking straps

on the lid to allow opening of the

storage compartment. Remove the

Mounting Plate, Stand-fitting Tilt-brack-

et (& Uni Sr. Stand, if stored in lid).

With the Caselite fixture face down,

attach the mounting plate C to the

adaptor receptacle in the center of the

fixture, as shown. Turn the 4 twist-lock

knobs D to lock the plate firmly to the

fixture. Mount Stand-fitting Tilt-bracket

A onto stand (5/8” stud) and tighten

knob E. Loosen large locking knob B

on Mounting Plate, lift Caselite and

insert stud end of stand fitting bracket A

into Mounting Plate fitting. Note that

the Tilt-bracket stud has a

safety indent cut into

it. Make sure to line

up the Mounting

Plate knob so

that its screw

will tighten into

the indent, for

most secure

mounting. Tighten

B sufficiently. If you

are attaching Caselite

Mounting Plate to a grip arm or

boom, be sure to tighten sufficiently

and use a larger stand with

counter balance weight

to retain stability.

The Stand-fitting Tilt-bracket is

designed to place the fixture’s center

of gravity squarely over the center of the

stand, while allowing a complete range

of rotation and tilting. With the fixture

mounting plate tightly mounted to the

Tilt-bracket, loosen the large locking

knob slightly to tilt the light on one

axis (up & down) and the smaller

locking knob to rotate the light on

the other axis (vertical vs horizontal

placement). Tighten both locking

knobs to secure fixture position.

2

Caselite

®

Operations

Caselite 2

Caselite 4

E

B

A

C

D

Opening the Unit Stand Mounting Tilting & Pointing

1 2 3 4

Commentaires sur ces manuels

Pas de commentaire